Sheet links
A sheet that says "see A-301" should open A-301 when you tap it. IssuesId makes those links for you when a PDF drawing is uploaded, shows what it found, and lets a manager take a wrong link away or add one it missed. Links also run between drawings and documents.
Automatic links
There is no button to press. Upload a PDF drawing, a new sheet or a new revision, and it is read straight away. Every sheet code it names exactly, such as A-301, becomes a link to that sheet. A code that is nearly right, such as A301, is never linked, because opening the wrong sheet is worse than opening none.
Links already built into the PDF file, such as the rows of an index sheet, are read as links too.
Sheets uploaded earlier catch up. When a new sheet arrives, or a sheet's code is changed or deleted, the current revision of each older sheet that names it gains the link, or loses it, within a few minutes.
For companies with the AI scan on, a picture sheet and the callouts drawn on a sheet are read as well, within daily limits. Turn it on or off in Settings › AI features.
Find references on a sheet runs the read again by hand. Company Admins and Managers see it. It reads the text of a PDF even when the AI scan is off.
What the line says
Company Admins and Managers see one line beside Find references saying what the last read of the sheet on screen found. The number is links to other sheets only, so a link to a document is not in it.
- →Scanned with 3 references, Scanned with 1 reference or Scanned with no references.
- →Not scanned yet, or Scanning… while it works.
- →No readable text on this sheet, Partly read: some text was skipped or Too large to read.
- →Scan failed. Press Find references to try again.
- →With the AI scan off, a PDF's line ends with Drawn callouts need the AI scan, and a picture sheet reads Picture sheet: drawn callouts need the AI scan.
- →With the AI scan on, a PDF's line can end with Looking for drawn callouts… or Drawn callouts not read: scan limit reached. A picture sheet waits with Picture sheet: press Find references to scan it.
- →1 link carried over to check (or 2, 3 and so on) is added when a new revision brought links across for someone to look at. See Adding a link.
Referenced by
Under a sheet, Referenced by lists the other sheets that point at it. Each chip opens that sheet on the page that holds the reference. Nothing shows when no sheet points here. Everyone who can open the sheet sees this row, but only sheets they can open themselves are listed.
Documents
A link on a drawing can open a document, and a link inside a document can open a drawing. On a desktop a PDF opens in IssuesId's own viewer, so its links work there too, with zoom, Fit, Open original and Download file. Press Esc to close it.
Documents themselves are not read for sheet codes. A link to a document on a drawing comes from a link built into the drawing's PDF, or from adding one by hand.
If a link points at something that is not in the project, you are told so and nothing else opens.
Removing a link
A Company Admin or Manager presses Edit links, selects the link on the sheet and presses Remove link. A wrong automatic link stays removed through every later read, and on the next revision of that sheet. There is no undo. If you remove one by mistake, add it back by hand.
A link built into the PDF file still opens inside the PDF, because it is part of the file.
Removing a link that was added by hand deletes it. If the sheet still names it, a later read may add it back as an automatic link.
Adding a link
In Edit links, a Company Admin or Manager presses Add link, drags a box on the sheet and chooses a drawing or a document from the Drawings and Documents tabs. The link is saved straight away.
A link added by hand survives every read: Find references, the read on upload, older sheets catching up, the AI scan and links built into the PDF. It is carried to the next revision wherever the page still exists. On the new revision it shows Check position until someone presses Keep here. To move a link, remove it and draw it again.
Link changes on the Revision history page records who added or removed what, and when. Company Admins and Managers see it.
What to read next
- →Documents & drawings — revisions, pins and who sees what.
- →Locations — the location tree.